Feelfree Flush Mount Rod Holders
Easy to install pair of flush mounted rod holders to fit Feelfree sit on tops such as Move, Juntos, Gemini Sport and Nomad. Also fits other brands with flat deck areas.
- Sold as a Pair
- Flat area dimensions 10cm x 6cm
- Vertical drop of at least 18cms required for tube
- Gaskets & leashes included
- Fixing Not Included
£14.96
Feelfree Flush Mount Rod Holders - Large
Flush rod holders with gasket, leash & screws, ideal for converting your sit on top kayak into a fishing kayak.
- Base diameter (at widest points) 10cm x 8.5cm
- Vertical drop of at least 20cm required for tube length
- Gasket & leash included
- Fixings (Screws) Included
£17.21
Feelfree Swivel Rod Holder
Swivel Rod Holders are perfect for forward mounting on a fishing kayak or to the side / behind of the seat position for trolling.
- Sold Singly
- Adjustable at the vertical hinge with a 90 degree vertical angle
- Adjustable on the horizontal swivel through 360 degrees
- Completely detaches from base for transport
£19.95
Ram Tube inc Round Base
Fully versatile rod tube rod holder. An ideal addition to any fishing kayak allowing perfect positioning or your fishing rods whether at anchor, drifting or trolling.
- Sold Singly with round base included
- Round base diameter 1.5"
- Inner Tube Diameter 1.9 inches (4.82 cm)
- Inner Tube Length 10 inches (25.4 cm) bottom to top of lip
£27.89
Railblaza Rod Holder II Starport
Railblaza Rod holder 2 is a hard-wearing and easy to install rod holder featuring the superb Railblaza Starport mount.
- Sold Singly with round Starport base included
- Starport base diameter 62mm
- Easy to install onto most kayaks
- Adjusts along multiple axes for the perfect angle
£31.41
Slide Track/Rail Rod Holder Mounting Systems
Feelfree Uni Track Mount
Side rail mounting rod holders and fish finders to your Feelfree Lure or Moken is simple with a Uni Track plate.
- Sold Singly
- Mounting plate compatible with rails on Feelfree kayaks
- Fits Feelfree Lure, and Moken kayaks
- Compatible with accessory brands including Scotty and Ram
£29.96
Railblaza Tracloader Starport
A Starport mount that fits into most kayaks slidetrack mounting rails using a dual bolt system.
- Sold Singly
- Mounting Fits Most Slide Track Rails
- Compatible With Railblaza Accessories
£19.51
Railblaza Starport Mount
Superb mounting system for fishing kayaks. Compatible with Railblaza range of mounted accessories.
- Compatible with any Railblaza rod holder, fishfinder and camera mount system
- Comes with 2 x M6 35mm machine screws, washers & nuts
- Starport base diameter 62mm
£11.86
Railblaza Starport HD
The Starport HD is designed to fit straight onto fishing kayaks with molded-in-threads or moulded-in mounting recesses for Scotty, Canon, Ram and some other brands of rod holders and accessories.
- Sold Singly
- Locking collar secures your rod holder
- Comes with 4 x M5 20mm machine screws, washers and Ny-Lock nuts
£11.86
Ram 1 Inch Or 1.5 Inch Ball
Powder Coated Marine Grade Aluminium with pre-drilled holes supporting the AMPS pattern. Ideal for adding mounting points for rod holders, fishfinders and other accessories.
- Sold Singly
- Available in 2 sizes - 1" or 1.5" ball diameter
- Powder coated marine grade aluminium
From
£8.99
£8.09
Rod Holder/Mounting Fixings & Sealant
Sikaflex EBT 300ml tube
A great way of getting a good seal around any rod holders you fit that requires drilling any holes into your kayak.
- Sold singly - 300ml tube
- Sealant and adhesive
- Clear sealant/adhesive
- Flexible sealant
£11.95
Well Nuts (Pack of 4)
Expanding Well nuts are ideal for rigging fishing kayaks. Perfect for fitting anchor trolley kits, rod holders and other items onto your fishing kayak.
- Sold as a pack of 4
- Bolt thread length 40mm
- Raw plug length 25mm
- Great for a variety of kayak fishing uses
£3.99
Tri Fold Rivets (Pack of 10)
Pop Rivets are an excellent alternative when securing items such as anchor trolley kits and rod holders to your fishing kayak.
- Sold in a pack of 10
- Requires use of a pop rivet gun to fit (Not Included)
- For a good waterproof seal we suggest using a blob of silicone sealant
£6.50
Stainless Steel Fitting Kit - Scotty/Railblaza
A pack of 4 x M6 bolts with washers and Nylock nuts. Bolts are compatible with Scotty and Railblaza.
- Sold as a pack of 4 Nylock nuts, bolts and washers
- Marine grade A4 (316) stainless steel 25mm long M6 bolts
- Suitable for freshwater and saltwater use
- We suggest using sealant to ensure a waterproof fixing
£2.99
Stainless Steel Fitting Kit - Ram Mounts
A pack of 4 x M6 bolts with washers and Nylock nuts. Bolts are compatible with Ram mounts and rod holders.
- Sold as a pack of 4 Nylock nuts, bolts and washers
- Marine grade A4 (316) stainless steel 25mm long M5 bolts
- Suitable for freshwater and saltwater use
- We suggest using sealant to ensure a waterproof fixing
£2.99
